Industrial lifts

STROS -Sedlčanské strojírny is a world-leading manufacturer of quality and reliable industrial lifts with over 60 years of experience. The company combines experience with innovative and open management methods, which confirms the certificated ISO 9001 management system.

Classical STROS industrial lifts can lift materials and people up to 350 m with a loading capacity from 500 to 5 000 kg. The lifting speed is varied in range from 35 to 90 m/min. There are going with different cabin areas depending on capacity.

Industrial lifts

Industrial lifts are primarily used to access high-level areas in various industrial and production facilities. They are usually required for a harsh and challenging project such as construction industry, large-scale farming, power stations, chemicals factories, cement plants, mining, oil and gas facilities, shipyards and ports, bridges and tunnels, etc.

There are some products of special purpose available: industrial freight elevator, elevator for explosive environments, lift for STS cranes, and battery elevator.

All industrial lifts have following options:

Overload protection
Single-piece or bi-parting car doors
Erection boom
Automatic rack lubrication.
fully automatic or semi-automatic control
variable frequency drive (VFD) or connected direct online (DOL).

Our company is an approved STROS -Sedlčanské strojírny representative in Qatar. Our products are of high-quality standards and always come with a certificate of compliance by the manufacturers. By choosing us you will get the same benefits for delivering STROS products and services as you can receive through a direct contract and even more. We carry out operational activities in Qatar, so you can count on prompt responses and close cooperation.

We assist at all stages from pre-sales consulting to installation. We are ready to thoroughly train your operation and service crews and advise them during operation. You can try and evaluate our products to rent them from us.

Industrial lifts

Service lifts with a load capacity of 400 – 500 kg

Industrial Personnel Elevator

Max. height:	350 m
Max. weight:	500 kg
Speed:	35 m/min

Open the category

Lifts with a load capacity up to 1000 kg

Industrial Lift

Max. height:	350 m
Max. weight:	1000 kg
Speed:	70 m/min

Open the category

Lifts with a load capacity up to 2500 kg

Industrial Lift

Max. height:	350 m
Max. weight:	2500 kg
Speed:	90 m/min

Open the category

Lifts with a load capacity over 2500 kg

Industrial Lift

Max. height:	350 m
Max. weight:	5000 kg
Speed:	90 m/min

Open the category

NOP 515 F3 BATTERY

Battery lift

Max. height:	350 m
Max. weight:	500 kg
Speed:	30 m/min

Open the category

Lift for port cranes STS

Industrial Lift

Max. height:	350 m
Max. weight:	500 kg
Speed:	46 m/min

Open the category

Lift BV 400

Industrial Lift

Max. height:	95 m
Max. weight:	400 kg
Speed:	19 m/min

Open the category

Comparison of lifts

Characteristics	Lifts with load capacity up to 400 - 500 kg	Lifts with load capacity up to 1000	Lifts with load capacity to 2500	Lifts with load capacity over 2500	NOP 515 F3 BATTERY	STS	LIFT BV 400
Maximum lifting height	350 m	350 m	350 m	350 m	350 m	350 m	95 m
Load capacity:	500 kg	up to 1000 kg	up to 2500 kg	over 5000 kg	500 kg	500 kg	400 kg
Maximum lifting speed:	35 m/min	70 m/min	90 m/min	90 m/min	30 m/min	46 m/min	19 m/min
Masts	I, H, S, BH	H, S, BH	H, S, BH	H, S, BH	S, H, I	—	H
Lift inner height	2400 mm	2400 mm	2400 mm	2400 mm	—	—	—
Lift cabin area	1,17 - 1,4 m²	до 2,4 m²	до 5 m²	до 9 m²	—	0,9 x 1,17 x 2,5 m	800 x 1 350 x 2 000 mm

FAQ

The warranty applies to industrial elevators. The warranty period is 12 months, regardless of who will install the equipment and carry out maintenance. If the customer enters into a contract with our company for further maintenance, the period can be extended to 24 or 36 months.

Buyers can buy construction lifts at the factory. The rest of the equipment is sold only to order. The lift can be manufactured from 4 to 12 weeks. The production time depends on the amount of equipment that needs to be manufactured.

Plant Scherer, Georgia, USA

Industrial elevator

Scope of work: installation and commissioning of the lift HS-2000-F4, maintenance

Object:

Lifting height:

23 meters

Sutton Power Plant, North Carolina, USA

Industrial elevator

Scope of work: installation and commissioning of the lift HS-1200-F4, maintenance

Object:

Lifting height:

23 meters

Horse Mesa Dam, Arizona, USA

Industrial elevator

Scope of work: installation and commissioning of the lift HS-1000-F4, maintenance

Object:

Lifting height:

50 meters

Industrial lifts from manufacture

As an official representative, we guarantee the adequate quality of all equipment and components. Industrial lifts are designed, manufactured, and approved according to valid European legislation. We take goods straight from STROS factories and supply them directly to the end consumer all around Qatar.

You can be sure all industrial lifts, components, and spare parts are original. Each delivery comes with a full package of accompanying documents, including instructions, warranty, certificates, authorizations, and licenses.

OUR ADVANTAGES

Flexible working conditions Individual approach to each client.
Search for solutions in non-standard situations

Professional installation We make professional installation of mast lifts

Delivery from warehouse We deliver the equipment you purchased to the facility

Availability of spare parts Main consumables and spare parts are in stock

Large equipment park Large, constantly updated range of equipment

Honest prices We offer a price without intermediary markups