Industrial lifts

STROS -Sedlčanské strojírny is a leading global manufacturer with more than 60 years of experience in the field of industrial lift production. The company brings together long-term experience together with innovative instruments, manufacturing the most advanced lifting equipment, proven by the international ISO 9001 certificate.  

STROS also has some special products for specific purposes: an elevator for explosive environments, a lift for STS cranes, and a battery elevator. 

Industrial lifts

Industrial lifts are used in working areas where access to height is required. That could be the construction industry, large-scale farming, power stations, chemical factories, cement plants, mining, oil and gas facilities, shipyards and ports, bridges and tunnels, etc. 

Standard STROS industrial lifts could bring goods and passengers to a height above 350 m. The loading capacity is from 500 to 5 000 kg. The hoisting speed is varied in the range from 35 to 90 m/min. The size of cabin working space depends on capacity.  

All industrial lifts could be equipped with:

  • Overload protection

  • Single-piece or bi-parting car doors

  • Erection boom

  • Automatic rack lubrication. 

  • fully automatic or semi-automatic control

  • variable frequency drive (VFD) or connected directly online (DOL).

Industrial lifts

Hoist Service lifts with a load capacity of 400 – 500 kg

Service lifts with a load capacity of 400 – 500 kg

Industrial Personnel Elevator

Max. height: 350 m
Max. weight: 500 kg
Speed: 35 m/min
Open the category
Hoist Lifts with a load capacity up to 1000 kg

Lifts with a load capacity up to 1000 kg

Industrial Lift

Max. height: 350 m
Max. weight: 1000 kg
Speed: 70 m/min
Open the category
Hoist Lifts with a load capacity up to 2500 kg

Lifts with a load capacity up to 2500 kg

Industrial Lift

Max. height: 350 m
Max. weight: 2500 kg
Speed: 90 m/min
Open the category
Hoist Lifts with a load capacity over 2500 kg

Lifts with a load capacity over 2500 kg

Industrial Lift

Max. height: 350 m
Max. weight: 5000 kg
Speed: 90 m/min
Open the category
Hoist NOP 515 F3 BATTERY

NOP 515 F3 BATTERY

Battery lift

Max. height: 350 m
Max. weight: 500 kg
Speed: 30 m/min
Open the category
Hoist Lift for port cranes STS

Lift for port cranes STS

Industrial Lift

Max. height: 350 m
Max. weight: 500 kg
Speed: 46 m/min
Open the category
Hoist Lift BV 400

Lift BV 400

Industrial Lift

Max. height: 95 m
Max. weight: 400 kg
Speed: 19 m/min
Open the category

Comparison of lifts

Characteristics Lifts
with load capacity up to 400 - 500 kg		 Lifts
with load capacity up to 1000		 Lifts
with load capacity to 2500		 Lifts
with load capacity over 2500		 NOP 515 F3 BATTERY STS LIFT BV 400
Maximum lifting height 350 m 350 m 350 m 350 m 350 m 350 m 95 m
Load capacity: 500 kg up to 1000 kg up to 2500 kg over 5000 kg 500 kg 500 kg 400 kg
Maximum lifting speed: 35 m/min 70 m/min 90 m/min 90 m/min 30 m/min 46 m/min 19 m/min
Masts I, H, S, BH H, S, BH H, S, BH H, S, BH S, H, I — H
Lift inner height 2400 mm 2400 mm 2400 mm 2400 mm — — —
Lift cabin area 1,17 - 1,4 m² до 2,4 m² до 5 m² до 9 m² — 0,9 x 1,17 x 2,5 m 800 x 1 350 x 2 000 mm

FAQ

The warranty applies to industrial elevators. The warranty period is 12 months, regardless of who will install the equipment and carry out maintenance. If the customer enters into a contract with our company for further maintenance, the period can be extended to 24 or 36 months.
Buyers can buy construction lifts at the factory. The rest of the equipment is sold only to order. The lift can be manufactured from 4 to 12 weeks. The production time depends on the amount of equipment that needs to be manufactured.
Plant Scherer, Georgia, USA
Industrial elevator
Scope of work: installation and commissioning of the lift HS-2000-F4, maintenance
Object:
Lifting height:
23 meters
Sutton Power Plant, North Carolina, USA
Industrial elevator
Scope of work: installation and commissioning of the lift HS-1200-F4, maintenance
Object:
Lifting height:
23 meters
Horse Mesa Dam, Arizona, USA
Industrial elevator
Scope of work: installation and commissioning of the lift HS-1000-F4, maintenance
Object:
Lifting height:
50 meters
Industrial lifts from manufacture

Our company is an approved STROS -Sedlčanské strojírny representative. Our products are of high-quality standards and always come with a certificate of compliance by the manufacturers. By choosing us you will get the same benefits for delivering STROS products and services as you can receive through a direct contract and even more. We carry out operational activities in Qatar, so you can count on prompt responses and close cooperation. 

We provide assistance at all stages from pre-sales consulting to installation. We are ready to thoroughly train your operation and service crews and advise them during operation. 

You can try and evaluate our products to rent them from us. 

OUR ADVANTAGES

Flexible working conditions Individual approach to each client.
Search for solutions in non-standard situations
Professional installation We make professional installation of mast lifts
Delivery from warehouse We deliver the equipment you purchased to the facility
Availability of spare parts Main consumables and spare parts are in stock
Large equipment park Large, constantly updated range of equipment
Honest prices We offer a price without intermediary markups

Certificates and Documentation

ISO 9001
Lifting Equipment
Industrial Elevators

Industrial lifts from manufacture

As an official representative, we guarantee the adequate quality of all equipment and components. Industrial lifts are designed, manufactured, and approved according to valid European legislation. We take goods straight from STROS factories and supply them directly to the end consumer all around Qatar. 

You can be sure all industrial lifts, components, and spare parts are original. Each delivery comes with a full package of accompanying documents, including instructions, warranty, certificates, authorizations, and licenses. 

GET A COMMERCIAL OFFER
We will select a lift suitable for your project, tell the timing and cost of implementation