Mast Climbers

The material lift mast climber construction is a special type of equipment that allows the loader to be used as a compact lifting tower. Our company offers its customers the most convenient, compact and modern solution, thanks to which a team of two people can carry out work at a height of up to five meters (depending on the model).

The Czech company STROS started its work in 1960. During its existence, Stros has managed to go a long way in the development and improvement of production. To date, the Stros company produces a wide range of facade lifts, working cradles, and other construction equipment. The main specialization of the Stros company is the production of construction lifts, spare parts, and components for lifting equipment.

Mast Climbers

Stros mast climbers are equipment that is designed for facade work. There are several variants of equipment in the model range: 1000 kg, 2000 kg, and 3000 kg.

In addition to mobility, it should be noted that thanks to such a mechanism, a high level of security is achieved. The design of the basket is suitable for construction and installation work, excluding risks to human life. In addition, it is necessary to note the following devices, which also guarantee safety in case of an accident.

The mast climber is a special type of equipment that allows the loader to be used as a compact lifting tower. Our company offers its customers the most convenient, compact and modern solution, thanks to which a team of two people can carry out work at a height of up to five meters (depending on the model).

The Czech company STROS started its work in 1960. During its existence, Stros has managed to go a long way in the development and improvement of production. To date, the Stros company produces a wide range of facade lifts, working cradles, and other construction equipment. The main specialization of the Stros company is the production of construction lifts, spare parts, and components for lifting equipment.

Mast Climbers Solutions

Hoist WP 1000

WP 1000

Mast Climbing Work Platform

Max. height: 350 m
Max. weight: 1000 kg
Speed: 6 m/min
Open the category
Hoist WP 2000

WP 2000

Mast Climbing Work Platform

Max. height: 350 m
Max. weight: 2000 kg
Speed: 25 m/min
Open the category
Hoist WP 3000

WP 3000

Mast Climbing Work Platform

Max. height: 350 m
Max. weight: 3000 kg
Speed: 13 m/min
Open the category
Hoist TP MX 1024

TP MX 1024

Transport platform

Max. height: 200 m
Max. weight: 1000 kg
Speed: 24 m/min
Open the category

Technical Details

Characteristics Platform
with lifting capacity up to 1000 kg
Platform
with lifting capacity 2000 kg
Platform
with lifting capacity 3000kg
Transport platform
TP MX 1024
Max. height of anchored platform 100 m 150 m 150 m 200 m
Maximal load capacity 1000 kg 2000 kg 3000 kg 1000 kg
Average speed with load 6,3 m/min 8,5 m/min 8,5 m/min
Internal platform dimensions 1 400 x 1 700 mm
Maximum platform length (single mast A) 10,14 m / 33‘–3 ¼“ 11,2 m / 36‘–9“ 11,2 m / 36‘–9“
МMaximum platform length(two mast B) 29,33 m / 96‘–2 ¾“ 26,13 m / 85‘–8 ¾“
Average speed without load 25 m/min 13 m/min
Platform width + extension (C+D) 1,42 + 0,65 m 1,6 + 1,55 m 1,6 + 1 m, 5‘–3“+3‘–3 3 “
Engine power under load 100% 4‘–8“+2‘–1 ½“ 5‘–3“+3‘–1 3 “ 2×2,2kW / 2×3HP 3×2,2kW / 3×3HP
Max. height of freestanding platform 1×3kW / 1×4HP 8 m / 26‘ 22 m / 72‘ 22 m / 72‘
Voltage system 3 NPE ~ 50 Hz 400 V 3 NPE ~ 50 Hz 400 V 3 NPE ~ 50 Hz 400 V


FAQ

Such a possibility is provided by the equipment regulations. If necessary, the internal consoles can be extended up to 1.6 meters. The equipment is equipped with mechanical sliding decking, so during operation the ledges and shelves will not interfere. The standard equipment includes a limit switch that controls the extension process. This helps protect the equipment from the risk of collision during altitude changes.
Yes, in the manufacture of an elevator, it is possible to make a design that is suitable for working not only on curved facades, but also in corner parts.
If you buy Stros equipment, then our company is ready to conduct training sessions and accredited trainings to prepare employees to work with our equipment.
Mast platforms can be installed and used everywhere, even in the most inaccessible places, unlike scaffolding. This helps to reduce the cost of hiring additional workers.
Yes, that's right. Installation of mast platforms on a working area of 200 m2 will take no more than 2/3 of a working day. If scaffolding were used, it would take 4 times longer.
The lease term of mast lifts may be exceeded, but the completion time should not be very different. The use of scaffolding will require significantly more time and labor, which may lead to the fact that the total rental cost will exceed the originally planned budget.
Of course, equipment can break down. But if you choose a proven manufacturer and supplier with a good reputation, the risk of breakage is reduced. If you save money now and turn to a company with a bad reputation, but low prices, then you will soon have to spend several times more on repairs. In addition, regular maintenance helps to extend the life of the equipment. Maintenance can be carried out by a company that has a permit for such services.
Yes, we sell only equipment that has passed all the necessary quality and safety checks. You can view all the results in the documentation that is attached to each equipment. The equipment is checked at each stage of production, which reduces the risk of breakage several times.
Mast Climbers from the manufacture

Our company provides services for the supply, installation, and service of lifting equipment, including mast climbers of the STROS brand in Oman.

Advantages of working with us:

  • catalog of equipment from more than 50 models with different characteristics;

  • delivery of mast climbers to the customer's facility;

  • installation assistance on the construction site;

  • maintenance, assistance with spare parts and components.

OUR ADVANTAGES

Flexible working conditions Individual approach to each client.
Search for solutions in non-standard situations
Professional installation We make professional installation of mast lifts
Delivery from warehouse We deliver the equipment you purchased to the facility
Availability of spare parts Main consumables and spare parts are in stock
Large equipment park Large, constantly updated range of equipment
Honest prices We offer a price without intermediary markups

Certificates and Documentation

ISO 9001
Lifting Equipment

Stros mast climbers allow you to perform a large number of operations and partially replace specialized equipment. So, the mast climbers for the loader can be used in the following cases:

  • For painting the walls of houses, cleaning glass, and other similar operations;

  • For the purpose of pruning trees of small height;

  • For performing repair work at height;

  • To perform other operations related to the need to lift workers to a certain height.

In practice, this means that the purchase of mast climbers will be the optimal solution for companies that require high-altitude work, but there is no need to purchase a specialized lift.

GET A COMMERCIAL OFFER
We will select a lift suitable for your project, tell the timing and cost of implementation